Dye Cells
Dye Cells for High-Energy Laser
Standard Dye Cells
Our dye cell units are compatible with many dye lasers. The cells are machined from high strength aircraft grade aluminium and graphite reinforced polymer to provide secure and reproducible mounting. The cell assemblies are mounted, adjusted and individually tested.
DC-R20
- QC-20 Quartz cell
- Ceramic flow body
- Dimensions are approx. 46 mm (w) x 42 mm (d) x 108 mm (h)
- standard quartz cell
DC-R40
- QC-40 Quartz cell
- Ceramic flow body
- Dimensions are approx. 66 mm (w) x 42 mm (d) x 108 mm (h)
- standard quartz cell
Enhanced Beam Profile Cells
These cells improve the quality of the spatial beam profile. The circular cross section of the dye cells support an improved quality of the spatial beam profile; flat-top intensity distribution at the laser exit and near-Gaussian in the far field (> 10 m). The cells are exchangeable with the standard amplifier cells (DC-R40). No special pump optic is required.
EBP-4
- Diameter of capilliary is 4 mm
- the recommended total pump power of the laser is about 150 – 300 mJ
- quarz cell for enhanced beam profile
EBP-5
- Diameter of capilliary is 5 mm
- the recommended total pump power of the laser is about 300 – 500 mJ
- quarz cell for enhanced beam profile
EBP-6
- Diameter of capilliary is 6 mm
- the recommended total pump power of the laser is about 500 – 1500 mJ
- quarz cell for enhanced beam profile
Dye Cells for High Repetition Rate Laser
DC-HRR RES
- Mounted Brewster-type dye cell for CREDO high repetition rate laser systems
- Resonator setup
- QC-HRR Quartz cell
DC-HRR AMP
- Mounted Brewster-type dye cell for CREDO high repetition rate laser systems
- Amplifier setup
- QC-HRR Quartz cell
DC-HRR PAMP
- Mounted Brewster-type dye cell for CREDO high repetition rate öaser systems
- High power amplifier configuration
- Recommended for pump power level above 100 W
- QC-HRR PAMP Quartz cell
Nozzles for CW Ring Laser
CW-Nozzle
CW-X99
