Credo Ti:Sa

High Repetition Rate Credo Ti:Sa-Laser

The compact solid-state high repetition rate Credo Titanium:Sapphire-Laser is designed for applications where a wide tuning range and high pulse intensity with narrow linewidth is needed. Typical applications are atmospheric research, combustion research, material science, semiconductor technology, and environmental analysis. The Credo Ti:Sa is pumped by an Empower 30 with adjustable pulse repetition rates between 1 and 10 kHz at 527 nm, pulse durations approximately 120 ns. The long pump pulse duration will result in more than one pulse from the Credo Ti:sa. Therefore, the Credo Ti:Sa cavity can use a Pockel‘s cell, which is used to generate a single powerfull pulse.

Energy Output

credo-tisa-diagram-energy-output

General Characteristics

Tuning Range 690 .. 1010 nm
Pulse Duration approx. 30 ns
Repetiton Rate 1 .. 3 kHz
Output Power 2.5 W (at peak wavelength)
Beam Size 1 mm (typical)
Linewidth < 0.2 cm-1

Requirements

Pump Laser Empower 30 (please contact Sirah for other pump lasers)
Ambient Conditions constant temperature in the 20 .. 25°C range
Cooling Water required for crystal (< 20 W)
Laboratory dust-free air (flow box)
Voltage 110..230 V, single phase, 50 Hz / 60 Hz
Control Computer XP / Vista / Windows 7 / Windows 8 / Windows 10 (32 & 64 bit), USB port

Options

Pockel’s cell for single pulse generation
Internal open loop frequency doubling

 

Optical Layout

credo-tisa-optical-layout

Dimensions

credo-tisa-dimensionsAll Dimensions in mm. Specifications are subject to change without notice.

Literature & Downloads

Datasheet Credo Ti:Sa