Matisse TX-light
Pound-Drever-Hall Stabilized Titanium:Sapphire Ring Laser
The Matisse TX-light is a narrow linewidth model of the Matisse laser series. Based on the Matisse TS, further linewidth narrowing down to 60 kHz is achieved by using the Pound-Drever-Hall locking technique. The unique long travel piezo mechanics allows single frequency scanning over 50 GHz without mode hopping. The Matisse TX-light can be converted into the Matisse DX-light cw ring dye laser.
Tuning Range
| Optics Set | Millennia Pro 15s | Millennia Pro 10s | Millennia Pro 5s |
|---|---|---|---|
| at approximately 780 nm | |||
| MOS-1 | 690..780 nm | 700..780 nm | 715..780 nm |
| MOS-2 | 750..870 nm | 750..870 nm | 750..870 nm |
| MOS-3 | 860..1015 nm | 860..990 nm | 860..925 nm |
| Maximum Power | 3200 mW | 1800 mW | 800 mW |
General Characteristics
| 1) at Matisse output port 2) relative to built in reference cavity | |||
| Spatial Mode | TEMoo | ||
| Beam Diameter 1) | 1.2..1.4 mm (typical) | ||
| Beam Divergence | < 2 mrad | ||
| Linewidth 2) | < 60 kHz rms / 100 msec | ||
| Amplitude Noise | < 0.75 % rms | ||
| Beam Polarization | horizontal | ||
Requirements
| 3) please contact Sirah for compatibility with other pump lasers | |||
| Pump Laser 3) | Millennia Pro Series | ||
| Ambient Conditions | constant temperature in the 20..25° C range | ||
| Cooling | required for crystal (< 20 Watt) | ||
| Laboratory | vibrational isolated optical table, dust-free air (flow box) | ||
| Computer Control | Windows XP / Windows Vista / Windows 7, USB port | ||
Optical Layout
Dimensions
All Dimensions in mm. Specifications are subject to change without notice.
Datasheet Matisse TX-light