Matisse TX

Titanium: Sapphire Ring Laser with Intra-Cavity Modulator

The Matisse TX is the ultra-narrow linewidth model of the Matisse laser series. Based on the Matisse TS, further linewidth narrowing down to 30 kHz is achieved by introduction of an electro-optical modulator (EOM) into the cavity of the Ti:Sa ring laser. The unique long travel piezo mechanics allows single frequency scanning over 50 GHz without mode hopping. The Matisse-TX can be converted into the Matisse-DX cw ring dye laser.

Tuning Range

Optics Set Millennia Pro 15s Millennia Pro 10s  
at approximately 780 nm
MOS-1 700..770 nm 710..780 nm  
MOS-2 750..870 nm 750..870 nm  
MOS-3 860..1000 nm 860..980 nm  
       
Maximum Power 2500 mW 1500 mW  

General Characteristics

1) at Matisse output port 2) relative to built in reference cavity
Spatial Mode TEMoo
Beam Diameter 1) 1.2..1.4 mm (typical)
Beam Divergence < 2 mrad
Linewidth 2) < 30 kHz rms / 100 msec
Amplitude Noise < 0.75 % rms
Beam Polarization horizontal

Requirements

3) please contact Sirah for compatibility with other pump lasers
Pump Laser 3) Millennia Pro Series
Ambient Conditions constant temperature in the 20..25° C range
Cooling required for crystal (< 20 Watt)
Laboratory vibrational isolated optical table, dust-free air (flow box)
Computer Control Windows XP / Windows Vista / Windows 7, USB port

Optical Layout

Dimensions

All Dimensions in mm. Specifications are subject to change without notice.

Literature & Downloads

Datasheet Matisse TX