Credo Ti:Sa 10kHz

High Repetition Rate Credo Ti:Sa-Laser

The compact solid-state high repetition rate Credo Titanium:Sapphire-10 kHz-Laser is designed for applications where a wide tuning range and high pulse intensity with narrow linewidth is needed. Typical applications are atmospheric research, combustion research, material science, semiconductor technology and environmental analysis. The laser can be tuned over the full wavelength range without exchanging optics. If a wavemeter is used (HighFinesse for example) the laser can scan to a desired wavelength automatically.

Energy Output

General Characteristics

 

Tuning Range 690 .. 950 nm
Pulse Duration (FWHM) approx. 28 – 50 ns
Repetiton Rate 3 .. 10 kHz
Output Power 6,8 W (at 10 kHz at peak wavelength)
Beam Size 1 mm (typical)
Linewidth < 6 GHz (with Etalon)
Beam Divergence < 1,5mrad

Requirements Pump Laser

 

Diffraction meas. value M² < 30
Repetition Rate 3 – 10 kHz
Pulse Duration 80 – 300 ns
Cooling Water Water required for TiSa-crystals cooling , 50 W cooling power
Laboratory dust-free air (flow box), 16 – 30°C
Voltage 110..230 V, single phase, 50 Hz / 60 Hz
Control Computer XP / Vista / Windows 7 / Windows 8 / Windows 10 (32 & 64 bit), USB port

Options

 

SHG up to 25% (of Fundamental)
THG up to 13% (of Fundamental and SHG)
FHG up to 9% (of SHG)
Linear Polarisation vertical / horizontal
Second Etalon – for 1GHz linewidth
Purge Unit – for dust free air and low humidity

 

Optical Layout

Dimensions

All Dimensions in mm. Specifications are subject to change without notice.

Literature & Downloads

Datasheet Credo Ti:Sa 10kHz